Publications

Book

  1. Mohd Afendi, Effect of Bond Thickness, LAP GmbH &  Co. KG (ISBN 978-3-8465-1631-7), 2012.

Buy now (www.amazon.com)

Book in Chapter

  1. Wan Sulong W.M.S., Rojan M.A., Mazlee M.N. (2018) Influence of Tool Plunge Depth on the Joint Strength and Hardness of Friction Stir Welded AA6061 and Mild Steel. In: Öchsner A. (eds) Engineering Applications for New Materials and Technologies. Advanced Structured Materials, vol 85. Springer, Cham.
  2. Wan Sulong W.M.S., Rojan M.A., Mazlee M.N. (2018) Tensile and Hardness Analysis of Dissimilar Friction Stir Welding Between AA6061 with AA5083 and Mild Steel. In: Öchsner A. (eds) Engineering Applications for New Materials and Technologies. Advanced Structured Materials, vol 85. Springer, Cham.
  3. Ismail, A., Awang, M., Samsudin, S.H., Rojan, M.A., Jasri, M.A.H.M., The hardness variation due to secondary heating in friction stir welding of small diameter aluminium alloy 6063 pipe, (2016) Advanced Structured Materials, 61, pp. 87-94.
  4. Jasri, M.A.H.M., Afendi Rojan, M., Azman, M., The material hardness and tensile strength of AA5083 aluminum alloy friction stir welding lap joint with conventional milling machine, (2016) Advanced Structured Materials, 61, pp. 95-103.

ISI Indexed Journal

  1. Maslinda, A.B., Abdul Majid, M.S., Ridzuan, M.J.M., Afendi, M., Gibson, A.G., Effect of water absorption on the mechanical properties of hybrid interwoven cellulosic-cellulosic fibre reinforced epoxy composites, (2017) Composite Structures, 167, pp. 227-237. (ISI Q1, IF: 3.858)
  2. Ahmad, H., Majid, M.S.A., Rojan, M.A., Mat, F., Dan-Mallam, Y., Hydrothermal effects on the burst strength of impacted glass fiber/epoxy composite pipes, (2016) Materialpruefung/Materials Testing, 58 (4), pp. 333-336. (ISI Q4, IF: 0.418)
  3. Ridzuan, M.J.M., Majid, M.S.A., Afendi, M., Mazlee, M.N., Gibson, A.G., Thermal behaviour and dynamic mechanical analysis of Pennisetum purpureum/glass-reinforced epoxy hybrid composites, (2016) Composite Structures, 152, pp. 850-859. (ISI Q1, IF: 3.858)
  4. Krishnan, P., Abdul Majid, M.S., Afendi, M., Yaacob, S., Gibson, A.G., Effects of hydrothermal ageing on the behaviour of composite tubes under multiaxial stress ratios, (2016) Composite Structures, 148, pp. 1-11. (ISI Q1, IF: 3.858)
  5. Haameem J.A., M., Abdul Majid, M.S., Afendi, M., Marzuki, H.F.A., Hilmi, E.A., Fahmi, I., Gibson, A.G., Effects of water absorption on Napier grass fibre/polyester composites, (2016) Composite Structures, 144, pp. 138-146. (ISI Q1, IF: 3.858)
  6. Ridzuan, M.J.M., Abdul Majid, M.S., Afendi, M., Azduwin, K., Amin, N.A.M., Zahri, J.M., Gibson, A.G., Moisture absorption and mechanical degradation of hybrid Pennisetum purpureum/glass-epoxy composites, (2016) Composite Structures, 141, pp. 110-116. (ISI Q1, IF: 3.858)
  7. Haameem J.A., M., Abdul Majid, M.S., Afendi, M., Marzuki, H.F.A., Fahmi, I., Gibson, A.G., Mechanical properties of Napier grass fibre/polyester composites, (2016) Composite Structures, 136, pp. 1-10. (ISI Q1, IF: 3.858)
  8. Ridzuan, M.J.M., Abdul Majid, M.S., Afendi, M., Aqmariah Kanafiah, S.N., Zahri, J.M., Gibson, A.G., Characterisation of natural cellulosic fibre from Pennisetum purpureum stem as potential reinforcement of polymer composites, (2016) Materials and Design, 89, pp. 839-847. (ISI Q1, IF: 4.364)
  9. Hawa, A., Abdul Majid, M.S., Afendi, M., Marzuki, H.F.A., Amin, N.A.M., Mat, F., Gibson, A.G., Burst strength and impact behaviour of hydrothermally aged glass fibre/epoxy composite pipes, (2016) Materials and Design, 89, pp. 455-464. (ISI Q1, IF: 4.364)
  10. Abdul Majid, M.S., Afendi, M., Daud, R., Gibson, A.G., Assaleh, T.A., Hale, J.M., Hekman, M., Acoustic emission monitoring of multiaxial ultimate elastic wall stress tests of glass fibre-reinforced epoxy composite pipes, (2015) Advanced Composite Materials, 24 (1), pp. 1-16. (ISI Q3, IF: 1.407)
  11. Krishnan, P., Abdul Majid, M.S., Afendi, M., Gibson, A.G., Marzuki, H.F.A., Effects of winding angle on the behaviour of glass/epoxy pipes under multiaxial cyclic loading, (2015) Materials and Design, 88, pp. 196-206. (ISI Q1, IF: 4.364)
  12. M. S. Abdul Majid, A. G. Gibson, M. Hekman, M. Afendi and N. A. M. Amin, Strain response and damage modelling of glass/epoxy pipes under various stress ratios. Plastics Rubber and Composites. 43(9), pp. 290-299, 2014. (ISI Q3, IF: 0.570)
  13. Mohd Afendi*, M.S. Abdul Majid, Ruslizam Daud, A. Abdul Rahman and Tokuo Teramoto, Strength Prediction and Reliability of Brittle Epoxy Adhesively Bonded Dissimilar Joint, International Journal of Adhesion and Adhesives, 45, pp. 21-31, 2013. (ISI Q1, IF: 2.211)
  14. Mohd Afendi*, Tokuo Teramoto and Hairul Bin Bakri, Strength Prediction of Epoxy Adhesively Bonded Scarf Joints of Dissimilar Adherends, International Journal of Adhesion and Adhesives, 31, pp. 402-411, 2011. (ISI Q1, IF: 2.211)

Scopus Indexed

  1. Ridzuan, M.J.M., Majid, M.S.A., Afendi, M., Firdaus, A.Z.A., Azduwin, K., Effect of elevated temperature on the tensile strength of Napier/glass-epoxy hybrid reinforced composites (2017) AIP Conference Proceedings, 1902, art. no. 020062,.
  2. Hazman, M.F., Basaruddin, K.S., Kamarrudin, N.S., Abdul Majid, M.S., Afendi, M., Effective elastic constants of corrugated core sandwich plate microstructure considering imperfection in adhesive bonding (2017) Journal of Physics: Conference Series, 908 (1), art. no. 012031, .
  3. Zikri, M.Z., Ridzuan, M.J.M., Abdul Majid, M.S., Afendi, M., Basaruddin, K.S., Effects of fibre loading and moisture absorption on the tensile properties of hybrid Napier/glass/epoxy composites (2017) Journal of Physics: Conference Series, 908 (1), art. no. 012014, .
  4. Lim, K.H., Majid, M.S.A., Ridzuan, M.J.M., Basaruddin, K.S., Afendi, M., Effect of nano-clay fillers on mechanical and morphological properties of Napier/epoxy Composites (2017) Journal of Physics: Conference Series, 908 (1), art. no. 012010, .
  5. Syafiq, W.M., Afendi, M.*, Daud, R., Mazlee, M.N., Abdul Majid, M.S., Lee, Y.S. Mechanical properties of friction stir welded butt joint of steel/aluminium alloys: Effect of tool geometry (2017) Journal of Physics: Conference Series, 908 (1), art. no. 012061, .
  6. Gurubaran, P., Afendi, M.*, Nur Fareisha, M.A., Abdul Majid, M.S., Haftirman, I., Rahman, M.T.A. Fatigue life investigation of UIC 54 rail profile for high speed rail (2017) Journal of Physics: Conference Series, 908 (1), art. no. 012026, .
  7. Izzawati, B., Daud, R., Afendi, M., Abdul Majid, M.S., Zain, N.A.M., Bajuri, Y. Stress analysis of implant-bone fixation at different fracture angle (2017) Journal of Physics: Conference Series, 908 (1), art. no. 012019, .
  8. Fatinah, T.S., Abdul Majid, M.S., Ridzuan, M.J.M., Hong, T.W., Amin, N.A.M., Afendi, M., Tensile properties of compressed moulded Napier/glass fibre reinforced epoxy composites(2017) Journal of Physics: Conference Series, 908 (1), art. no. 012013, .
  9. Samshuri, S.F., Daud, R., Rojan, M.A., Mat, F., Basaruddin, K.S., Hassan, R., Energy release rate analysis on the interface cracks of enamel-cement-bracket fracture using virtual crack closure technique (2017) Journal of Physics: Conference Series, 908 (1), art. no. 012016, .
  10. Mariam, M., Afendi, M.*, Majid, M.S.A., The Effect of Dry and Wet Condition on the Mechanical Properties of Hybrid Single Lap (2017) IOP Conference Series: Materials Science and Engineering, 238 (1), art. no. 012005, .
  11. Izzawati, B., Daud, R., Afendi, M., Majid, M.S.A., Zain, N.A.M., Convergence and stress analysis of the homogeneous structure of human femur bone during standing up condition (2017) AIP Conference Proceedings, 1885, art. no. 020190, .
  12. Bahri, N.F., Afendi, M.*, Razlan, Z.M., Nor, A., Baharuddin, S.A., Experimental investigation on the failure of T-joints at elevated temperature under unaxial loading (2017) AIP Conference Proceedings, 1885, art. no. 020084.
  13. Samshuri, S.F., Daud, R., Rojan, M.A., Basaruddin, K.S., Abdullah, A.B., Ariffin, A.K., Convergence study of global meshing on enamel-cement-bracket finite element model (2017) AIP Conference Proceedings, 1885, art. no. 020167, .
  14. Shahriman, A.B., Mohamad Syafiq, A.K., Hashim, M.S.M., Razlan, Z.M., Khairunizam, W.A.N., Hazry, D., Afendi, M., Daud, R., Rahman, M.D.T.A., Cheng, E.M., Zaaba, S.K., Air flow quality analysis of modenas engine exhaust system (2017) AIP Conference Proceedings, 1885, art. no. 020120, .
  15. Rina, Z.S., Amin, N.A.M., Hashim, M.S.M., Majid, M.S.A., Rojan, M.A., Zaman, I., Development of a Microcontroller-based Battery Charge Controller for an Off-grid Photovoltaic System (2017) IOP Conference Series: Materials Science and Engineering, 226 (1), art. no. 012138, .
  16. Maslinda, A.B., Abdul Majid, M.S., Ridzuan, M.J.M., Afendi, M., Gibson, A.G., Effect of water absorption on the mechanical properties of hybrid interwoven cellulosic-cellulosic fibre reinforced epoxy composites (2017) Composite Structures, 167, pp. 227-237.
  17. Baharuddin, S.A., Cheng, E.M., Lee, K.Y., Zaaba, S.K., Syahirah, K.N., Abbas, Z., Nasir, N.F.M., Afendi, M., Zakaria, Z., Development of five port reflectometer for reflection based sensing system (2017) AIP Conference Proceedings, 1808, art. no. 020011, .
  18. Pang, O.E., Daud, R., Amin, N.A.M., Rojan, M.A., Majid, M.S.A., Finite element modelling of thin intermetallic compound layer fractures (2017) Journal of Mechanical Engineering and Sciences, 11 (1), pp. 2478-2487.
  19. Basaruddin, K.S., Daud, R., Abdul Majid, M.S., Afendi, M., Ibrahim, I., Experimental and finite element analysis on ratchetting behaviour of glass fibre reinforced epoxy composites under cyclic loading (2017) International Journal of Mechanical and Mechatronics Engineering, 17 (1), pp. 38-46.
  20. Mariam, M., Afendi, M.*, Majid, M.S.A., Environmental effect on short-beam composite under three-point bending test (2017) Key Engineering Materials, 740 KEM, pp. 17-24.
  21. Syafiq, W.M., Afendi, M.*, Daud, R., Mazlee, M.N., Jaafar, N.A., Variation of tool offsets and its influence on mechanical properties of dissimilar friction stir welding of aluminum alloy 6061 and S235JR mild steel by conventional belting milling machine (2017) Lecture Notes in Mechanical Engineering, pp. 37-47.
  22. Balasena, G., Bakar, S.A., Zakaria, Z., Ikeura, R., Razlan, Z.M., Hazry, D., Ahmad, W.K.W., Meng, C.E., Rojan, M.A., Study of eddy current density distribution in a contactless breast cancer detection mechanism using magnetic induction spectroscopy (2017) Lecture Notes in Electrical Engineering, 398, pp. 89-94.
  23. Ooi, E.P., Daud, R., Amin, N.A.M., Mat, F., Sulaiman, M.H., Abdul Majid, M.S., Afendi, M., Ariffin, A.K., Fracture behavior of intermetallic compound (IMC) of solder joints based on finite elements’ simulation result (2017) Lecture Notes in Mechanical Engineering, pp. 49-57.
  24. Faizi, M.K., Shahriman, A.B., Majid, M.S.A., Shamsul, B.M.T., Ng, Y.G., Basah, S.N., Cheng, E.M., Afendi, M., Zuradzman, M.R., Wan, K., Hazry, D., An overview of the Oil Palm Empty Fruit Bunch (OPEFB) potential as reinforcing fibre in polymer composite for energy absorption applications (2016) MATEC Web of Conferences, 90, art. no. 01064, .
  25. Gurubaran, P., Afendi, M.*, Kanasan, N., Haftirman, I., Tasyrif, M., Basaruddin, K.S., Mixed mode loading fracture toughness of Arcan adhesive joint: Effect of surface roughness (2016) AIP Conference Proceedings, 1775, art. no. 030038, .
  26. Ikram, I.M., Ismail, A., Zakaria, A., Awang, M., Rojan, M.A.*, Hamid, D.A., Makhtar, M.F., Said, M.T.S.M., A preliminary experimental study of underwater Friction Stir Welding AA5083 plate butt joint (2016) Journal of Environmental Science and Technology, 9 (6), pp. 462-466.
  27. Makhtar, M.F., Ismail, A., Suffian, M.H.M., Rojan, M.A.*, Hamid, D.A., Ikram, I.M., Said, M.T.S.M., Bashah, N.A.K.A preliminary study of fixtureless shipbuilding practice (2016) Journal of Environmental Science and Technology, 9 (6), pp. 467-471.
  28. Ridzuan, M.J.M., Majid, M.S.A., Afendi, M., Mazlee, M.N., Gibson, A.G.Thermal behaviour and dynamic mechanical analysis of Pennisetum purpureum/glass-reinforced epoxy hybrid composites (2016) Composite Structures, 152, pp. 850-859.
  29. Cheng, E.M., Abbas, Z., Abdul Malek, M., Lee, K.Y., You, K.Y., Khor, S.F., Afendi, M., Geometrical optics based path loss model for furnished indoor environment (2016) Applied Computational Electromagnetics Society Journal, 31 (9), pp. 1125-1134.
  30. Azam, N., Afendi, M.*, Effect of Wire-EDM cutting parameters on material removal rate of titanium alloy (Ti6Al4V) (2016) AIP Conference Proceedings, 1756, art. no. 060001, .
  31. Fahmi, I., Majid, M.S.A., Afendi, M., Haslan, M., Helmi, E.A., Haameem, J.A.M., Impact behaviour of Napier/polyester composites under different energy levels (2016) AIP Conference Proceedings, 1756, art. no. 040003, .
  32. Krishnan, P., Abdul Majid, M.S., Afendi, M., Yaacob, S., Gibson, A.G., Effects of hydrothermal ageing on the behaviour of composite tubes under multiaxial stress ratios (2016) Composite Structures, 148, pp. 1-11.
  33. Haameem, J.A.M., Abdul Majid, M.S., Afendi, M., Haslan, M., Fahmi, I., Alkaline treatment and thermal properties of napier grass fibres (2016) International Journal of Automotive and Mechanical Engineering, 13 (1), pp. 3238-3247.
  34. Haameem J.A., M., Abdul Majid, M.S., Afendi, M., Marzuki, H.F.A., Hilmi, E.A., Fahmi, I., Gibson, A.G., Effects of water absorption on Napier grass fibre/polyester composites (2016) Composite Structures, 144, pp. 138-146.
  35. Ridzuan, M.J.M., Abdul Majid, M.S., Afendi, M., Azduwin, K., Amin, N.A.M., Zahri, J.M., Gibson, A.G., Moisture absorption and mechanical degradation of hybrid Pennisetum purpureum/glass-epoxy composites (2016) Composite Structures, 141, pp. 110-116.
  36. Syafiq, W.M., Rojan, M.A.*, Abdul Majid, M.S., Jaafar, N.A., Fracture toughness of Friction Stir Welded aluminium alloy (2016) ARPN Journal of Engineering and Applied Sciences, 11 (5), pp. 3102-3108.
  37. Syafiq, W.M., Rojan, M.A.*, Abdul Majid, M.S., Jaafar, N.A., Fracture toughness of Friction Stir Welded aluminium alloy (2016) ARPN Journal of Engineering and Applied Sciences, 11 (5), pp. 3571-3577.
  38. Haameem J.A., M., Abdul Majid, M.S., Afendi, M., Marzuki, H.F.A., Fahmi, I., Gibson, A.G., Mechanical properties of Napier grass fibre/polyester composites(2016) Composite Structures, 136, pp. 1-10.
  39. Ridzuan, M.J.M., Abdul Majid, M.S., Afendi, M., Aqmariah Kanafiah, S.N., Zahri, J.M., Gibson, A.G., Characterisation of natural cellulosic fibre from Pennisetum purpureum stem as potential reinforcement of polymer composites (2016) Materials and Design, 89, pp. 839-847.
  40. Hawa, A., Abdul Majid, M.S., Afendi, M., Marzuki, H.F.A., Amin, N.A.M., Mat, F., Gibson, A.G., Burst strength and impact behaviour of hydrothermally aged glass fibre/epoxy composite pipes (2016) Materials and Design, 89, pp. 455-464.
  41. Ismail, A., Awang, M., Rojan, M.A.*, Samsudin, S.H., The characteristic of temperature curves for friction stir welding of aluminium alloy 6063-T6 pipe during tool plunging stage (2016) ARPN Journal of Engineering and Applied Sciences, 11 (1), pp. 277-280.
  42. Majid, M., Afendi, M.*, Lieh, W.W., Hafizan, K., Strength of composites hybrid joint (2016) ARPN Journal of Engineering and Applied Sciences, 11 (1), pp. 216-221.
  43. Ismail, A., Awang, M., Samsudin, S.H., Rojan, M.A.*, Jasri, M.A.H.M., The hardness variation due to secondary heating in friction stir welding of small diameter aluminium alloy 6063 pipe (2016) Advanced Structured Materials, 61, pp. 87-94.
  44. Ridzuan, M.J.M., Majid, M.S.A., Afendi, M., Rahman, M.N., Azduwin, Y.K., Thermal, composition and morphological properties of untreated and alkali-treated napier grass fibres (2016) Journal of Engineering and Applied Sciences, 11 (11), pp. 2485-2489.
  45. Ahmad, H., Majid, M.S.A., Rojan, M.A., Mat, F., Dan-Mallam, Y., Hydrothermal effects on the burst strength of impacted glass fiber/epoxy composite pipes (2016) Materialpruefung/Materials Testing, 58 (4), pp. 333-336.
  46. Khor, S.F., Md Yusoff, M.H.A., Cheng, E.M., Rojan, M.A., Johar, B., Chik, A., Talib, Z.A., Poobalan, B., Dielectric spectroscopy on mixture of rice husk, rice husk ash and rice bran from 4 Hz to 1 MHz (2016) International Journal of GEOMATE, 11 (1), pp. 2150-2154.
  47. Cheng, E.M., Abdul Malek, M.F., Khor, S.F., You, K.Y., Lee, K.Y., Rojan, M.A., Abu Bakar, S., Mohd Nasir, N.F., Zakaria, Z., Tan, W.H., Reflection and dielectric measurement for salinity of water using microstrip loop antenna and dielectric probe (2016) International Journal of GEOMATE, 11 (2), pp. 2335-2340.
  48. Krishnan, P., Abdul Majid, M.S., Afendi, M., Gibson, A.G., Marzuki, H.F.A., Effects of winding angle on the behaviour of glass/epoxy pipes under multiaxial cyclic loading (2015) Materials and Design, 88, pp. 196-206.
  49. Mansor, M.F.C., Cheng, E.M., Malek, M.F.A., Beh, H.G., Chik, A., Khor, S.F., Rojan, M.A., Nasir, N.F.M., Ong, S.A., Bakar, S.A., Study on 10 GHz electromagnetic wave absorption of cullet doped with iron (II, III) oxide (2015) Proceedings – 2015 2nd International Conference on Biomedical Engineering, ICoBE 2015, art. no. 7235922, .
  50. Aishah, S., Fareq, M., Cheng, E.M., Lee, K.Y., Tan, W.C., Afendi, M., Shahriman, A.B., Nasir, N.F.M., Tan, W.H., Syahirah, K.N., You, K.Y., Khor, S.F., Study on moisture content in animal fats using Six-Port Reflectometer (SPR) (2015) Proceedings – 2015 2nd International Conference on Biomedical Engineering, ICoBE 2015, art. no. 7235920 .
  51. Jasri, M.A.H.M., Afendi, M.*, Ismail, A., Ishak, M., The microstructure of aluminum A5083 butt joint by friction stir welding (2015) AIP Conference Proceedings, 1660, art. no. 070103, .
  52. Jasri, M.A.H.M., Afendi, M.*, Ismail, A., Ishak, M.. The hardness effect of friction stir welding by MILKO 37 milling machine (2015) AIP Conference Proceedings, 1660, art. no. 070096, .
  53. Fitriah, S.N., Abdul Majid, M.S., Daud, R., Afendi, M., Nazirah, Z.S., The effects of hydrothermal ageing on the crushing behavior of glass/epoxy composite pipes (2015) Materials Science Forum, 819, pp. 411-416.
  54. Abdul Majid, M.S., Afendi, M., Daud, R., Gibson, A.G., Assaleh, T.A., Hale, J.M., Hekman, M., Acoustic emission monitoring of multiaxial ultimate elastic wall stress tests of glass fibre-reinforced epoxy composite pipes (2015) Advanced Composite Materials, 24 (1), pp. 1-16.
  55. Tan, W.-H., Afendi, M., Ahmad, R., Daud, R., Shukry, M., Cheng, E.M., Sound absorption analysis on micro-perforated panel sound absorber with multiple size air cavities (2015) International Journal of Mechanical and Mechatronics Engineering, 15 (5), pp. 71-76.
  56. Ridzuan, M.J.M., Majid, M.S.A., Afendi, M., Azduwin, K., Kanafiah, S.N.A., Dan-mallam, Y., The Effects of the Alkaline Treatment’s Soaking Exposure on the Tensile Strength of Napier Fibre (2015) Procedia Manufacturing, 2, pp. 353-358.
  57. Haameem, J.A.M., Abdul Majid, M.S., Afendi, M., Haslan Fadli, M., Helmi, E.A., Fahmi, I.Tensile and flexural strength of untreated napier grass fibre/polyester composites (2015) Materials Science Forum, 819, pp. 295-300.
  58. Izzawati, B., Afendi, M.*, Nurhashima, S., Nor, A., Abdullah, A.R., Daud, R., Abdul Majid, M.S., Strength of adhesive T-joint in granulator fluidization bed at elevated temperature (2015) Materials Science Forum, 819, pp. 443-448.
  59. Mazlee, M.N., Shamsul, J.B., Yasmin, Y., Shamsudin, S.R., Risby, M.S., Afendi, M., The effects of rolling deformation and annealing treatment on damping capacity of 1200 aluminium alloy (2015) Materials Science Forum, 819, pp. 20-24.
  60. Nurhashima, S., Afendi, M.*, Izzawati, B., Nor, A., Abdullah, A.R., Amin, N.A.M., Abdul Majid, M.S., Daud, R., Strength of adhesive T-joint under moisture condition (2015) Materials Science Forum, 819, pp. 437-442.
  61. Che Mansor, M.F., Cheng, E.M., Zakaria, Z., Abdul Malek, M.F., Chik, A., Rojan, M.A., Zahid, L., Abu Bakar, S., Mohd Nasir, N.F., Khor, S.F., Beh, H.G.Microwave absorption analysis on recycled glass doped with Ferum (II, III) Oxide (Fe2O3) (2015) International Journal of Mechanical and Mechatronics Engineering, 15 (5), pp. 1-13.
  62. Idrus, H., Afendi, M.*, Hoe, W.C., Fatigue crack initiation and growth of aluminum alloy with stress ratio effects (2014) Key Engineering Materials, 594-595, pp. 1105-1111.
  63. Nawi, N.A.M., Abdullah, A.R., Afendi, M.*, Majid, M.S.A., Daud, R., Idrus, H., Numerical stress analysis of epoxy adhesively bonded dissimilar joint (2014) Key Engineering Materials, 594-595, pp. 930-934.
  64. Majid, M.S.A., Afendi, M.*, Daud, R., Amin, N.A.M., Mohamad, A., Cheng, E.M., Gibson, A.G., Hekman, M., General lifetime damage model for glass fibre reinforced epoxy (GRE) composite pipes under multiaxial loading (2014) Key Engineering Materials, 594-595, pp. 624-628.
  65. Jasri, M.A.H.M., Afendi, M.*, Fauzi, A.H.M., Prototype of compact flexural fatigue testing machine (2014) Applied Mechanics and Materials, 554, pp. 350-354.
  66. Afendi, M.*, Athirah, N., Abdul Majid, M.S., Daud, R., Teramoto, T., Experimental and numerical investigation of V-shaped epoxy adhesive joints (2014) Journal of Mechanical Engineering and Sciences, 6, pp. 929-939.
  67. Fartini, M.S., Abdul Majid, M.S., Afendi, M., Amin, N.A.M., Mohamad, A., Effects of elevated temperatures on the compression strength of nanoclay filled unsaturated polyester resin (2014) Applied Mechanics and Materials, 554, pp. 208-212.
  68. Krishnan, P., Abdul Majid, M.S., Afendi, M., Marzuki, H.F., Mohd Kazim, M.N.F., Short-term test of ±55 ° filament wound GRE composite pipes under multiaxial stress ratios (2014) Applied Mechanics and Materials, 554, pp. 371-375.
  69. Athirah, N., Afendi, M.*, Hafizan, K., Amin, N.A.M., Majid, M.S.A., Stress and thermal analysis of cubesat structure (2014) Applied Mechanics and Materials, 554, pp. 426-430.
  70. Nor, A., Afendi, M.*, Abdul Majid, M.S., Abdullah, A.R., Shahriman, A.B., Stress analysis of adhesive bonding of urea granulator fluidization bed (2014) Applied Mechanics and Materials, 554, pp. 160-164.
  71. Fartini, M.S., Abdul Majid, M.S., Afendi, M., Daud, R., Mohamad, A., Effect of nano-clay and their dispersion techniques on compressive properties of unsaturated polyester resin (2014) Applied Mechanics and Materials, 554, pp. 27-31.
  72. Abdul Majid, M.S., Gibson, A.G., Hekman, M., Afendi, M., Amin, N.A.M., Strain response and damage modelling of glass/epoxy pipes under various stress ratios (2014) Plastics, Rubber and Composites, 43 (9), pp. 290-299.
  73. Haameem, M.J.A., Abdul Majid, M.S., Ubaidillah, E.A.H.E., Afendi, M., Daud, R., Amin, N.A.M., Tensile strength of untreated napier grass fibre reinforced unsaturated polyester composites (2014) Applied Mechanics and Materials, 554, pp. 189-193.
  74. Afendi, M.*, Hafizan, K., Abdul Majid, M.S., Daud, R., Amin, N.A.M., Meng, C.E., Teramoto, T., Fracture characteristics of shear adhesive dissimilar joint (2014) Applied Mechanics and Materials, 606, pp. 165-169.
  75. Nurhashima, S., Afendi, M.*, Izzawati, B., Amin, N.A.M., Abdul Majid, M.S., Taufik, M., Strength of three-point-bending ductile adhesive joint with dissimilar adherents (2014) Applied Mechanics and Materials, 554, pp. 406-410.
  76. Izzawati, B., Afendi, M.*, Afif, M., Nurhashima, S., Daud, R., Amin, N.A.M., Abdul Majid, M.S., 3D finite element stress analysis of butt adhesively bonded dissimilar joint: Effect of bond thickness on strength (2014) Applied Mechanics and Materials, 554, pp. 355-359.
  77. Abdul Majid, M.S., Afendi, M., Daud, R., Amin, N.A.M., Mohamad, A., Hekman, M., The interlaminar shear strength test of helical wound glass fibre reinforced epoxy laminates subjected to hydrothermal ageing (2014) Applied Mechanics and Materials, 554, pp. 391-395.
  78. Abdul Majid, M.S., Daud, R., Afendi, M., Amin, N.A.M., Cheng, E.M., Gibson, A.G., Hekman, M., Stress-strain response modelling of glass fibre reinforced epoxy composite pipes under multiaxial loadings (2014) Journal of Mechanical Engineering and Sciences, 6, pp. 916-928.
  79. Atikah, N., Afendi, M.*, Hirmaliza, S., Abdul Majid, M.S., Amira, N., Mazlee, M.N., Strength of ductile adhesive butt joint bonded with dissimilar adherents: Effect of surface roughness (2014) Applied Mechanics and Materials, 554, pp. 366-370.
  80. Mohd Jasri, M.A.H., Afendi, M.*, Nik, N.Z., Izzawati, B., Nurhashima, S., Nor, A., Yahud, S., Amin, N.A.M., Tensile shear strength of wood adhesive from recycled polystyrene (2014) Applied Mechanics and Materials, 554, pp. 3-6.
  81. Cheng, E.M., Abbas, Z., Fareq, M., Khor, S.F., You, K.Y., Lee, K.Y., Abdul Majid, M.S., Rojan, M.A., The effect of physical changes in a furnished indoor environment on Wireless Local Area Network (wlan) signals (2014) International Journal of Mechanical and Mechatronics Engineering, 14 (5), pp. 1-15.
  82. Cheng, E.M., Fareq, M., Shahriman, A.B., Mohd Afendi, R., Lee, Y.S., Khor, S.F., Tan, W.H., Nashrul Fazli, M.N., Abdullah, A.Z., Jusoh, M.A., Development of microstrip patch antenna sensing system for salinity and sugar detection in water (2014) International Journal of Mechanical and Mechatronics Engineering, 14 (5), pp. 31-36.
  83. Cheng, E.M., Fareq, M., Shahriman, A.B., Afendi, M., Zulkarnay, Z., Khor, S.F., Liyana, Z., Nashrul Fazli, M.N., Tan, W.H., Noorpi, N.S.M., Mukhtar, N.M., Othman, M., Development of low cost microwave detection system for salinity and sugar detection (2014) International Journal of Mechanical and Mechatronics Engineering, 14 (5), pp. 59-71.
  84. Abdullah, A.R., Afendi, M.*, Majid, M.S.A., Effect of adhesive thickness on adhesively bonded T-joint (2013) IOP Conference Series: Materials Science and Engineering, 50 (1), art. no. 012063, .
  85. Daud, R., Ariffin, A.K., Abdullah, S., Majid, M.S.A., Rojan, M.A., Mathematical model of elastic crack interaction and two-dimensional finite element analysis based on Griffith energy release rate (2013) Advanced Materials Research, 795, pp. 587-590.
  86. Majid, M.S.A., Afendi, M., Daud, R., Gibson, A.G., Hekman, M., Effects of winding angles in biaxial ultimate elastic wall stress (UEWS) tests of glass gibre reinforced epoxy (GRE) composite pipes (2013) Advanced Materials Research, 795, pp. 424-428.
  87. Afendi, M.*, Majid, M.S.A., Daud, R., Ishino, Y., Teramoto, T., Stress analysis and failure characterizations of V-shaped epoxy adhesively bonded joint (2013) Advanced Materials Research, 795, pp. 290-293.
  88. Majid, M.S.A., Afendi, M., Daud, R., Amin, N.A.M., Mohamad, A., Cheng, E.M., Gibson, A.G., Modelling of multi-axial ultimate elastic wall stress (UEWS) test for glass fibre reinforced epoxy (GRE) composite pipes (2013) Applied Mechanics and Materials, 367, pp. 113-117.
  89. Amin, N.A.M., Mohamad, A., Majid, M.S.A., Afendi, M., Bruno, F., Belusko, M., Experimental investigation of PCM spheres in thermal energy storage system (2013) Applied Mechanics and Materials, 367, pp. 228-233.
  90. Afendi, M.*, Abdul Majid, M.S., Daud, R., Abdul Rahman, A., Teramoto, T., Strength prediction and reliability of brittle epoxy adhesively bonded dissimilar joint (2013) International Journal of Adhesion and Adhesives, 45, pp. 21-31.
  91. Cheng, E.M., Fareq, M., Abdullah, F.S., Wee, F.H., Khor, S.F., Lee, Y.S., Afendi, M., Shukry, M., Shahriman, A.B., Khairunizanm, W., Liyana, Z.Y., Dielectric spectroscopy of pharmaceutical drug (Paracetamol) dosage in water (2013) RFM 2013 – 2013 IEEE International RF and Microwave Conference, Proceedings, art. no. 6757295, pp. 409-413.
  92. Afendi, M.*, Rahman, A.A., Haftirman, H., Majid, M.S.A., Syayuthi A.R., A., Closed-form solutions for epoxy adhesively bonded dissimilar joint (2012) 8th Asian-Australasian Conference on Composite Materials 2012, ACCM 2012 – Composites: Enabling Tomorrow’s Industry Today, 1, pp. 538-544.
  93. Syayuthi A.R., A., Haftirman, Afendi, M., Majid, M.S.A., Wei, N.B., Manan, M.S.A., The effect of different impact velocities on advanced composite material for aircraft application (2012) 8th Asian-Australasian Conference on Composite Materials 2012, ACCM 2012 – Composites: Enabling Tomorrow’s Industry Today, 1, pp. 248-253.
  94. Majid, M.S.A., Gibson, A.G., Assaleh, T.A., Rookus, C.A.P., Hekman, M., Afendy, M., Haftirman, Syayuthi A.R., A.Damage characterisation of glass fibre-reinforced epoxy (GRE) pipes under biaxial ultimate elastic wall stress (UEWS) tests using acoustic emissions (2012) 8th Asian-Australasian Conference on Composite Materials 2012, ACCM 2012 – Composites: Enabling Tomorrow’s Industry Today, 2, pp. 1592-1597.
  95. Afendi, M.*, Teramoto, T., Bakri, H.B., Strength prediction of epoxy adhesively bonded scarf joints of dissimilar adherends(2011) International Journal of Adhesion and Adhesives, 31 (6), pp. 402-411.
  96. Afendi, M.*, Teramoto, T., Matsuda, A., Strength and fracture characteristics of SUS304/AL-alloy scarf adhesive joint with various adhesive thicknesses (2011) Key Engineering Materials, 462-463, pp. 768-773.

Non-indexed Journal

  1. P Gurubaran, M Afendi*, I Haftirman, K Nanthini, Three Dimensional Finite Element Analysis of Rolling Contact between Wheel and Rail, International Journal of Vehicle Structures & Systems 9 (3), 186-189, 2017.
  2. Mohd Afendi* and Tokuo Teramoto, Fracture Toughness Test of Epoxy Adhesive Dissimilar Joint with Various Adhesive Thicknesses, Journal of Solid Mechanics and Materials Engineering (JSME), 4 (7), pp. 999-1010, 2010. ISSN: 1880-9871.
  3. Mohd Afendi* and Tokuo Teramoto, Effect of Bond Thickness on Fracture Behavior of Interfacial Crack in Epoxy Adhesive Joint of Dissimilar Materials, Journal of The Adhesion Society of Japan , 45 (12), pp. 471-477, 2009. ISSN: 0916-4812.

International Conference Proceeding

  1. Azman Ismail, Mokhtar Awang, Khalid Nor and Mohd Afendi Rojan, The Temperature and Hardness Distribution of the Friction Stir Welded AA6063 Pipe Butt Joint. 2nd International Materials, Industrial, and Manufacturing Engineering Conference (MIMEC 2015). In submission.
  2. B. Izzawati, M. Afendi, S. Nurhashima, A. Nor, A.R. Abdullah, R. Daud, and M.S. Abdul Majid, FE Modeling and Analysis of Structural Adhesive T-joint at Elevated Temperature. World Virtual Conference on Advanced Research in Materials and Engineering Applications (WVCARMEA2014).
  3. A. Nor, M. Afendi, M.S. Abdul Majid, B. Izzawati, S. Nurhashima and A.R. AbdullahExperimental and FE Analysis of Stress Analysis of Adhesive T-joint with and without crack in Fluidization Bed. World Virtual Conference on Advanced Research in Materials and Engineering Applications (WVCARMEA2014).
  4. S. Nurhashima, M. Afendi, B. Izzawati, A. Nor, A. R. Abdullah, A. M. Amin, M.S. Abdul Majid and R. Daud, Study the Influence Moisture Absorption Effect on Adhesive Strength. World Virtual Conference on Advanced Research in Materials and Engineering Applications (WVCARMEA2014).
  5. Azman Ismail, Mokhtar Awang and Mohd Afendi Rojan, A Low Cost Fixture for Friction Stir Welded Pipe Butt Joint. Advanced Material and Structural Mechanical Engineering (ICAMSME 2014).
  6. B. Izzawati, M. Afendi, S. Nurhashima, A. Nor, A.R. Abdullah, R. Daud, and M.S. Abdul Majid, Strength of adhesive T-joint in granulator fluidization bed at elevated temperature. Functional Materials and Metallurgy International Conference 2014 (ICoFM2014).
  7. S. Nurhashima, M. Afendi, B. Izzawati, A. Nor, A.R. Abdullah, N.A.M. Amin, M.S. Abdul Majid and R. Daud, Strength of Adhesive T-joint under Moisture Environment. Functional Materials and Metallurgy International Conference 2014 (ICoFM2014)
  8. A. Nor, M. Afendi, M.S. Abdul Majid, B. Izzawati, S. Nurhashima and A.R. Abdullah, Effect of Bond Thickness on Interfacial Fracture Toughness of Adhesive T-joint in Fluidization Bed. Functional Materials and Metallurgy International Conference 2014 (ICoFM2014)
  9. N.A.M. Amin, M.A. Said, A. Mohamad, M.S. Abdul Majid, M. Afendi, R. Daud, F. Bruno and M. Belusko, Mathematical modeling on thermal energy storage systems, World Virtual Conference on Advanced Research in Mechanical and Materials Engineering (WVCARMME 2014). 
  10. N.A.M. Amin, A. Mohamad, M.S. Abdul Majid, R. Daud, M. Afendi, M.A. Said, F. Bruno and M. Belusko, Parametric study on a thermal energy storage containing single PCM sphere, World Virtual Conference on Advanced Research in Mechanical and Materials Engineering (WVCARMME 2014). 
  11. Pranesh Krishnan, M.S. Abdul Majid, M. Afendi, M.N.F. Mohd Kazim, Short-term test of ±55˚ filament wound GRE composite pipes under multiaxial stress ratios, World Virtual Conference on Advanced Research in Mechanical and Materials Engineering (WVCARMME 2014). 
  12. M.S.Fartini, M.S. Abdul Majid, M. Afendi, R. Daud, A. Mohamad, Effect of Nano-clay and their Dispersion Techniques on Compressive Properties of Unsaturated Polyester Resin, World Virtual Conference on Advanced Research in Mechanical and Materials Engineering (WVCARMME 2014). 
  13. M.S. Fartini, M.S. Abdul Majid, M. Afendi, N.A.M. Amin, A. Mohamad, Effects of elevated temperatures on the compression strength of nanoclay filled unsaturated polyester resin, World Virtual Conference on Advanced Research in Mechanical and Materials Engineering (WVCARMME 2014). 
  14. M. Haameem J.A., M.S. Abdul Majid, M. Afendi, R. Daud, N.A.M. Amin, A. Mohamad, Tensile Strength of Untreated Napier Grass Fibre Reinforced Unsaturated Polyester Composites, World Virtual Conference on Advanced Research in Mechanical and Materials Engineering (WVCARMME 2014). 
  15. M.S. Abdul Majid, M. Afendi, R. Daud, N.A.M. Amin, M. Azizul, The interlaminar shear strength test of helical wound glass fibre reinforced epoxy laminates subjected to hydrothermal ageing, World Virtual Conference on Advanced Research in Mechanical and Materials Engineering (WVCARMME 2014).
  16. Nur Athirah, M. Afendi, Ku Hafizan, Amar Hafiz, N.A.M. Amin and M.S. Abdul Majid, Stress and Thermal Analysis of CubeSat Structure, World Virtual Conference on Advanced Research in Mechanical and Materials Engineering (WVCARMME 2014).
  17. M.A.H.M. Jasri, M. Afendi, A.H.M. Fauzi, Prototype of Compact Flexural Fatigue Testing Machine, World Virtual Conference on Advanced Research in Mechanical and Materials Engineering (WVCARMME 2014).
  18. M.A.H.M. Jasri, M. Afendi, Nik N.Z., I. Basirom, S.N.M. Isa, N.B. Abu, S. Yahud and N.A.M. Amin, Tensile Shear Strength of Wood Adhesive from Recycled Polystyrene, World Virtual Conference on Advanced Research in Mechanical and Materials Engineering (WVCARMME 2014).
  19. N. Atikah, M. Afendi, S. Hirmaliza, and N. Amira, Strength of Ductile Adhesive Butt Joint Bonded with Dissimilar Adherents: Effect of Surface Roughness, World Virtual Conference on Advanced Research in Mechanical and Materials Engineering (WVCARMME 2014).
  20. S. Nurhashima, M. Afendi, B. Izzawati, N.A.M. Amin, M.S. Abdul Majid and M. Taufik, Strength of Three-Point-Bending Ductile Adhesive Joint With Dissimilar Adherends, World Virtual Conference on Advanced Research in Mechanical and Materials Engineering (WVCARMME 2014).
  21. B. Izzawati, M. Afendi, M. Afif, S. Nurhashima, R. Daud, N.A.M. Amin and M.S. Abdul Majid, 3D Finite Element Stress Analysis of Butt Adhesively Bonded Dissimilar Joint: Effect of Bond Thickness on Strength,World Virtual Conference on Advanced Research in Mechanical and Materials Engineering (WVCARMME 2014).
  22. A. Nor, M. Afendi, A.R. Abdullah and M.S. Abdul Majid, Stress Analysis of Adhesive Bonding of Urea Granulator Fluidization Bed, World Virtual Conference on Advanced Research in Mechanical and Materials Engineering (WVCARMME 2014).
  23. M.A.H.M. Jasri, M. Afendi, A. Ismail and M. Ishak, The Hardness Effect of Friction Stir Welding By MILKO 37 Milling Machine,  International Conference on Mathematics, Engineering & Industrial Applications 2014 (ICoMEIA 2014)
  24. M.A.H.M. Jasri, M. Afendi, A. Ismail and M. Ishak, The Microstructure of Aluminium A5083 Butt Joint by Friction Stir Welding, International Conference on Mathematics, Engineering & Industrial Applications 2014 (ICoMEIA 2014).
  25. H.L. Lee, Shahriman A.B., S. Yaacob,Zuradzman M.R., Khairunizam Wan, Zunaidi IB, E.M. Cheng, S.K. Zaaba, Shafriza N.B., Mohd Afendi, and S.A. Zoohi, In Vitro Evaluation of Finger’s Hemodynamics For Vein Graft Surveillance Using Electrical Bio-Impedance Method, 2nd International Conference on Robotic Automation System (ICORAS2013).
  26. M. N. Rahman Y., Shahriman, A.B., Sk Za‘Aba, Khairunizam Wan, Sa Roohi M.D., Ahmad Helmy Abdul KarimM.D., Shafriza N.B, E.M.cheng, Mohd Afendi, CFD Analysis On Mismatched End-to-end Internal Diameter of RSVG Models, 2nd International Conference on Robotic Automation System (ICORAS2013).
  27. M.A.H.M. Jasri, M. Afendi, A. Ismail and M. Ishak, Friction Stir Welding of Aluminum Alloy 5083 Butt Joint using Modified MILKO 37 Milling Machine, International Postgraduate Conference On Engineering And Management 2014 (IPCEM2014).
  28. Nur Athirah, Ku Hafizan, M. Afendi, N.A.M. Amin and M.S. Abdul Majid, Effect of Bond Thickness on Stress Distribution of Hybrid Dissimilar Joint, International Postgraduate Conference On Engineering And Management 2014 (IPCEM2014).
  29. M. Afendi, M. S. Abdul Majid, R. Daud,N. A. M. Amin and T. Teramoto, Strength and Fracture Characterizations of Shear Adhesive Dissimilar Joint, 1st International Materials, Industrial, and Manufacturing Engineering Conference (MIMEC2013).
  30. N.A.M. Amin, A. Mohamad, R. Daud, M.S. Abdul Majid, M. Afendi, F. Bruno, M. Belusko, CFD Model Validation for Charging and Discharging of A PCM Encapsulated In Sphere, 3rd International Conference and Exhibition on Sustainable Energy and Advanced Material (ICE-SEAM 2013).
  31. Cheng Ee Meng, Mohd Fareq Abd Malek, Wee Fwen Hoon, Khor Shing Fhan, Noor Anida Abu Talib, Mohd Afendi Rojan, Mohd Shukry Abdul Majid, Shahriman Abu Bakar, Wan Khairunizam Wan Ahmad and Lee Yeng Seng, Dielectric spectroscopy of pharmaceutical drug (Paracetamol) dosage in water, 2013 IEEE International RF and Microwave Conference (RFM 2013).
  32. M.S. Abdul Majid, M. Afendi, R. Daud, N.A.M. Amin, Azizul Mohamad, E.M. Cheng, A.G. Gibson, M. Hekman, General lifetime damage model for glass fibre reinforced epoxy (GRE) composite pipes under multiaxial loading, 2nd International Conference on Advanced Material Engineering & Technology 2013 (ICAMET 2013) Bandung, Indonesia, November 28-29, 2013.
  33. Haftirman, M. Afendi, and Wong Chun Hoe, Fatigue Crack Initiation and Growth of Aluminum Alloy with Stress Ratio Effects.  2nd International Conference on Advanced Material Engineering & Technology 2013 (ICAMET 2013) Bandung, Indonesia, November 28-29, 2013.
  34. Nur Athirah, A.R. Abdullah, M. Afendi, M.S. Abdul Majid, and Ruslizam Daud, Numerical Stress Analysis of Epoxy Adhesively Bonded Dissimilar Joint.  2nd International Conference on Advanced Material Engineering & Technology 2013 (ICAMET 2013) Bandung, Indonesia, November 28-29, 2013.
  35. A.R. Abdullah, Mohd Afendi and M.S. Abdul Majid, The Effect of Adhesive Thickness on Stainless Steel T-joint by means of experiment and numerical analysis. BOND21.
  36. Mohd Afendi, Nur Athirah, M.S. Abdul Majid, R. Daud and Tokuo Teramoto, Experimental and Numerical Investigation of V-Shaped Epoxy Adhesive Joint. The 2nd International Conference on Mechanical Engineering Research (ICMER2013) Gambang 1-3 July 2013. P289
  37. R. Daud, A.K. Ariffin, S. Abdullah, M.S. Abdul Majid and M. Afendi, Investigation of Elastic Stress Shielding Damage Interaction Based on Fitness for Service (FFS) Codes . The 2nd International Conference on Mechanical Engineering Research (ICMER2013) Gambang 1-3 July 2013. P286
  38. M.S. Abdul Majid, R. Daud, M. Afendi, A.G. Gibson and M. Hekman, Stress-Strain Response Modelling of Glass Fibre Reinforced Epoxy Composite Pipes Under Multiaxial Loadings. The 2nd International Conference on Mechanical Engineering Research (ICMER2013) Gambang 1-3 July 2013. P277
  39. A.R. Abdullah, Mohd Afendi, M.S. Abdul Majid, Effect of Adhesive Thickness on Adhesively Bonded T-Joint. The 2nd International Conference on Mechanical Engineering Research (ICMER2013) Gambang 1-3 July 2013. P306
  40. N. A. M. Amin, A. Mohamad, M. S. Abdul Majid, M. Afendi, F. Bruno and M. Belusko, Experimental Investigation of PCM Spheres in Thermal Energy Storage System. 2013 3rd International Conference on Mechanics, Simulation and Control (ICMSC2013) Kanyakumari, India 22-23 June. DrNAMA3
  41. M.S. Abdul Majid, M. Afendi, R. Daud, N. A. M. Amin, A. Mohamad, E.M.Cheng, A.G. Gibson, Modelling of multi-axial ultimate elastic wall stress (UEWS) test for glass fibre reinforced epoxy (GRE) composite pipes, 2013 3rd International Conference on Mechanics, Simulation and Control (ICMSC 2013), Kanyakumari, India, 22-23 June.
  42. Mohd Afendi, Abdul Majid M.S., Daud R., Ishino Y. and Teramoto T.,  Stress Analysis and Failure Characterizations of V-shaped Epoxy Adhesively Bonded Joint. The 2nd International Conference on Sustainable Materials Engineering (ICoSM2013) Penang 26-27 March 2013. icosm2013 pg 291-295
  43. M.S. Abdul Majid, M. Afendi, R. Daud, A.G. Gibson, M. Hekman, Effects of winding angles in biaxial ultimate elastic wall stress (UEWS) tests of glass fibre reinforced epoxy (GRE) composite pipes. The 2nd International Conference on Sustainable Materials Engineering (ICoSM2013) Penang 26-27 March 2013. icosm2013 pg 425-429
  44. R. Daud, A.K. Ariffin, S. Abdullah, M.S.A. Majid,  M.A. Rojan, Mathematical model of elastic crack interaction and two-dimensional finite element analysis based on Griffith energy release rate. The 2nd International Conference on Sustainable Materials Engineering (ICoSM2013) Penang 26-27 March 2013. icosm2013 pg 588-591
  45. M. Afendi, Haftirman, M. Shukry, A. Syayuthi, Closed-form Solutions for Epoxy Adhesively Bonded Dissimilar Joint, 8th Asian-Australasian Conference on Composite Materials (ACCM8) Kuala Lumpur 6-8 November 2012. P-JOI-166
  46. M.S. Abdul Majid, A.G. Gibson, G. Kotsikos,  J.M. Hale, T.A. Assaleh, C.A.P. Rookus, M.Hekman, M.A. Rojan, Haftirman, A.S. Abdul Rahman, Damage characterisation of glass fibre reinforced epoxy (GRE) pipes under biaxial ultimate elastic wall stress (UEWS) tests using acoustic emissions, 8th Asian-Australasian Conference on Composite Materials (ACCM8) Kuala Lumpur 6-8 November 2012. O-TUB-171
  47. A. Syayuthi.A.R, Haftirman, Mohd Afendi Bin Rojan, Mohd Shukry Abdul Majid, M.S. Abdul Manan, Zainudin M.Z, The Effect of Different Velocity on Impact Strength of Advanced Composite Material for Aircraft Application, 8th Asian-Australasian Conference on Composite Materials (ACCM8) Kuala Lumpur 6-8 November 2012. P-FRA-340
  48. M. Afendi, M.S. Abdul Majid, Haftirman, A. Abdul Rahman, T. Nakajima and T. Teramoto, Simple Strength Prediction of V-shaped Epoxy Adhesive Joint, International Conference on Marine Technology (MARTEC) Kuala Terengganu 20-22 October 2012. MTP-64
  49. M.S. Abdul Majid, A.G. Gibson, J.M. Hale, M. Hekman, C.A.P. Rookus and M. Afendi, Modelling of Ultimate Elastic Wall Stress (UEWS) Tests for Glass Fibre-reinforced Epoxy Composites Pipes, International Conference on Marine Technology (MARTEC) Kuala Terengganu 20-22 October 2012. MTP-63
  50. Haftirman, A. Syayuthi A.R., M. Afendi, M.S. Abdul Majid, Tee Chin Rong, Fatigue Behavior of Butt Welded Joints in a Mild Steel, International Conference on Marine Technology (MARTEC) Kuala Terengganu 20-22 October 2012. MTP-69
  51. R. Daud, M.A. Rojan, A.K. Ariffin and S. Abdullah, Elastic Crack Interaction Limit of Two Interacting Edge Cracks in Finite Body,  International Conference  on  Applications and Design in Mechanical Engineering  (ICADME 2012-Penang) , CD-ROM, AM17, 2012. Download
  52. Mohd Afendi, Imaduddin Helmi Bin Wan Nordin, Ruslizam Daud and Tokuo Teramoto, Strength and Fracture Characteristics of Shear Adhesive Dissimilar Joint, International Conference  on  Applications and Design in Mechanical Engineering  (ICADME 2012-Penang) , CD-ROM, AM23, 2012. Download
  53. Mohd Afendi, Mohd Hafis Bin Sulaiman, Ishak Bin Ibrahim, Toru Nakajima, Masashi Maeda and  Tokuo Teramoto, Study on Strength of V-shaped Epoxy Adhesive Joint, International Conference  on  Applications and Design in Mechanical Engineering  (ICADME 2012-Penang) , CD-ROM, AM24, 2012. Download
  54. Imaduddin Helmi bin Wan Nordin, Salmie Suhana binti Che Abdullah, Mohd Afendi bin Rojan and Mohd Hafis bin Sulaiman, Bending Fatigue Strength of Case-Carburized Spur Gears with Boss,International Conference  on  Applications and Design in Mechanical Engineering  (ICADME 2012-Penang) , CD-ROM, AM27, 2012. Download
  55. Mohd Hafis bin Sulaiman, Mohd Ridzuan bin Mohd Jamir, Mohd Afendi bin Rojan, Imaduddin Helmi bin Wan Nordin and Raymond Boon Whee Heng, Load-displacement Behavior of RBD Palm Stearin Oil Lubricant Quantity in Cold Extrusion, International Conference  on  Applications and Design in Mechanical Engineering  (ICADME 2012-Penang) , CD-ROM, AM29, 2012. Download
  56. Mohd Afendi, Tokuo Teramoto and Ruslizam Daud, Prediction of Strength and Failure for Brittle Epoxy Adhesive Joints of Dissimilar Adherends, 5th International Symposium on Advanced Science and Technology in Experimental Mechanics (5th ISEM’10-Kyoto), CD-ROM, 050, 2010. Download
  57. Mohd Afendi, Tokuo Teramoto and Akihiro Matsuda, Strength and Fracture Characteristics of SUS304/AL-alloy Scarf Adhesive Joint with Various Adhesive Thicknesses, 8th International Conference on Fracture and Strength of Solids (FEOFS2010-Kuala Lumpur), CD-ROM, A206, 2010. Download
  58. Mohd Afendi and Tokuo Teramoto, Fracture Toughness Test of Epoxy Adhesive Dissimilar Joint with Various Adhesive Thicknesses, Asian Pacific Conference for Materials and Mechanics 2009 (APCMM2009-Yokohama), CD-ROM, a55, 2009. Download
  59. Mohd Afendi and Tokuo Teramoto, Effect of Bond Thickness on Fracture Behavior of Interfacial Crack in Epoxy Adhesive Joint of Dissimilar Materials, The Third Asian Conference on Adhesion 2009 (ACA2009-Hamamatsu), CD-ROM, pp. 287-290, 2009. Download
  60. Mohd Afendi and Tokuo Teramoto, Evaluation of Shear Strength and Failure Characteristics of Epoxy Adhesive Joints of Dissimilar Adherends, in: Proceedings of Ibaraki District Conf. (JSME), pp. 165-166, 2010. Download
  61. Mohd Afendi and Tokuo Teramoto, Assessment of Strength and Fracture Toughness of Scarf Epoxy Adhesive Joint with Dissimilar Adherends, in: Proceedings of 16th JSME Kanto Meeting, pp. 479-480, 2010. Download
  62. Mohd Afendi and Tokuo Teramoto, Effect of Scarf Angle and Bond Thickness on Strength of Epoxy Adhesively Joints of Dissimilar Adherends, in: Proceedings of Ibaraki District Conf. (JSME), pp. 1-2, 2009. Download
  63. Mohd Afendi and Tokuo Teramoto, Effect of Bond Thickness on Fracture Characteristics of Interfacial Crack in Epoxy Adhesive Joint of Dissimilar Materials, in: Proceedings of 15th JSME Kanto Meeting, pp. 229-230, 2009. Download
  64. Mohd Afendi and Tokuo Teramoto, Fracture Characteristics of Interfacial Crack in Epoxy Adhesive-bonded Dissimilar Materials, in: Proceedings of Yamanashi District Conf. (JSME), pp. 243-244, 2008. Download
  65. Mohd Afendi and Tokuo Teramoto, Three-Point Bending Fracture Test of Epoxy Adhesive-bonded Dissimilar Materials, in: Proceedings of 14th JSME Kanto Meeting, pp.369-370, 2008. Download
  66. Tokuo Teramoto, Ryosuke Yoshizawa and Mohd Afendi, Tensile and Bending Strength of Elastic Adhesive Joint for Plastic Material, in: Proceedings of 14th JSME Kanto Meeting, pp.367-368, 2008. (in Japanese) Download

Thesis and dissertations

  1. Doctoral Program in Engineering Mechanics and Energy, University of Tsukuba, July 2011. Study on Effect of Bond Thickness upon Adhesive Strength and Fracture Characteristics of Brittle Epoxy Adhesively Bonded Dissimilar Joint.
  2. Master’s Program in Engineering Mechanics and Energy, University of Tsukuba, March 2008. Three-Point Bending Fracture Test of Epoxy Adhesive-bonded Dissimilar Materials.
  3. Bachelor’s Program in Engineering Systems, University of Tsukuba, March 2006. Strength of Epoxy Adhesive-bonded Joint Specimens.

*Please feel free to download. All rights reserved.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Trackback this post  |  Subscribe to the comments via RSS Feed


%d bloggers like this: